The material feeding amount of the hay cutter shall be appropriate, which may cause overload and stop operation. Of course, not too little, too little will affect the cutting efficiency. Before stopping the work, turn the shift handle to position 0, let the machine idle for about 2min, and stop the machine after the dust and weeds in the machine are blown away. For the price of the hay cutter with adjustable cutting clearance, the cutting clearance shall be adjusted reasonably according to the thickness of the crop stalk to ensure the normal operation of the price of the hay cutter. At the end of each shift, the dust and dirt on the machine shall be removed in time; at the end of each season, the sundries in the machine shall be removed, and the mower manufacturer shall apply antirust oil on the working parts.
It is not allowed to work alone for teenagers under 16 years old and those who do not know the rules of using the machine. When feeding grass, the operator shall stand at the side of the hopper, and it is forbidden to reach into the hopper's shield with both hands. At the same time, strictly prevent wooden sticks, metal objects, bricks and stones from entering the machine by mistake, so as to avoid damaging the machine and injuring people. The motor is used as the supporting power. The power is transmitted to the main shaft, and the gear at the other end of the main shaft transmits the speed regulated power to yacaokun through the gearbox, universal joint, etc. when the materials to be processed enter between the upper and lower pressure Caokun, the speed held by the pressure Caokun is sent to the cutting mechanism, which is chopped by the high-speed rotating cutter and then thrown out of the machine through the grass outlet. The mower shall work at the specified speed, and overspeed and overload operation are strictly prohibited.
The material feeding amount of the hay cutter shall be appropriate, which may cause overload and stop operation. Of course, not too little, too little will affect the cutting efficiency. Before stopping the work, turn the shift handle to position 0, let the machine idle for about 2min, and stop the machine after the dust and weeds in the machine are blown away. For the mower with adjustable cutting clearance, the cutting clearance shall be adjusted reasonably according to the thickness of the crop stalk to ensure the normal operation of the mower price. At the end of each shift, the dust and dirt on the machine shall be removed in time; at the end of each season, the sundries in the machine shall be removed, and the mower manufacturer shall apply antirust oil on the working parts.
