Operation precautions of wood crusher machine
Source:未知Author:admin Addtime:2020-03-25 14:01 Click:
Small wood crusher machine is a professional equipment for crushing wood, leftover materials and other sawdust. It can crush and process brittle materials, fiber materials, ductile materials and light materials. The feed inlet adopts self-priming feed, which greatly enhances the safety factor. The whole process is simple and easy to operate, but you can operate the small wood crusher. Let's go through the following article Find out the right way to open a small wood crusher.
First of all, the raw materials of small wood crusher cannot contain hard materials such as metals. In order to ensure the standard rate of flattening, the small-scale wood crusher reminds the customer that the materials should not contain metals before leaving the factory. This is because the wood crusher contains vulnerable parts such as hammers and screens. First, let's understand the working principle of the wood crusher. The small-scale wood crusher is driven by the motor to drive the main shaft to run at high speed, so that the machine can produce high strength to the crushed materials Because of the impact force, compression force, cutting force and friction force, the machine has a unique crusher function for fibrous materials. After filtering through the screen, it is extracted by the fan. Therefore, in order not to damage the hammer and screen, the crushed materials of customers should be single and free of metal;
Secondly, the bearing and other parts of small wood crusher shall be cleaned. After a day's work, we should check the bearings, screens, hammers and rotors one by one. When the bearings are working for about 300 hours, they should clean the bearings and change the engine oil. When the engine oil is installed, it is better to fill 1 / 3 of the clearance of the bearing seat, not more than 1 / 2 at most. When the machine is stopped for a long time, remove the drive belt. Small wood crusher is mainly composed of shell, bearing, screen, driving wheel, groove frame and other parts, all materials are made of manganese steel. Among them, a triple stator large circle, a pulverizing cutter head and a fineness analyzer are installed in the medium-sized machine body, with complete process, and dust removal facilities can be configured to prevent the field personnel from inhaling dust;
