Precautions for using pellet machine in summer
Source:未知Author:admin Addtime:2020-03-14 10:58 Click:
First of all, the preservation of the finished products produced by the flat die pellet machine. Because the burning point of the finished products is low, the finished products must be kept away from the fire source, and placed in a cool place. It is better to avoid direct sunlight. At last, the temperature of the equipment parts and engine parts of the flat die pellet machine should be checked from time to time. If the temperature is too high, it is better to stop the machine for a rest, Then start the production work to prevent the equipment from locking due to the high engine temperature
Secondly, summer is the harvest season of wheat straw. For those just harvested straw, the humidity after straw crushing should be well controlled, so as not to affect the production due to the problem of straw moisture during production
Finally, the production temperature in summer is very high, so it's better to shut down the flat mold particle function at noon, understand the requirements of the tempering temperature and moisture of the particles, and start production in the afternoon, and make sure to protect the flat mold particle machine equipment from sun shading and other maintenance, so as to avoid production accidents caused by the high production temperature of the straw flat mold particle machine equipment, Attention should also be paid to fire protection for the preservation of raw materials produced by straw pelletizer
