Daily maintenance and precautions of feed granulator machine
First of all, before starting the feed granulator machine, clean and inspect the whole machine comprehensively to confirm whether the belt is properly tightened and whether the drive bearing is firmly tightened, then connect the power supply and observe whether the motor rotates in the direction indicated by the sign.
1. Open the feed in the mold hole with steel nails, and then extrude until the feed can be discharged normally. If the user cannot press out the particles with his formula feed, he should put some edible oil on the surface of the grinding tool hole, and repeatedly extrude for several minutes until the feed can be discharged normally.
2. During the production of the feed granulator, the particle length can be achieved by the upper and lower positions of the cutter.
3. If the formwork is replaced, the hopper can be removed, the barrel can be removed, the pressing wheel and cutter can be removed, the Gong cap on the main shaft can be screwed off, and the flat formwork can be lifted out with the accessory "puller". Both sides can be used.
4. In order to ensure the safe production of users, it is necessary to cut off the power supply first after removing the lower box cover of granulator equipment. Turn off the switch of the granulator and use the emergency stop button in case of emergency.
5. No matter what machine is used for a period of time, it is necessary to disassemble the roller and granulator for cleaning and maintenance, inject lubricating oil, and conduct comprehensive maintenance and oil injection for feed granulator every other period of time.
6. Although many users only buy the main machine when they buy the feed granulator because they have a motor in their home, Xiaobian suggests that users choose the corresponding model of the equipment and compatible motor to avoid unnecessary troubles in the future.
